Electric Boat Open Trade Positions

Company Name Electric Boat
Location North Kingstown
Date Posted August 20, 2020
Job Type Full-time

Description

Candidates may apply at www.gdeb.com/careers .

Title CNC Machinist

The Inside Machinist is responsible for: - Set up and program editing and operation of CNC milling and turning centers - Requires the verification of parts and parts configuration to plan requirements using various high tolerance precision measuring tools - Must have the ability to read and interpret mechanical detail and assembly drawings, including GD&T, weld- joint symbols, and NDT requirements   This position is located in North Kingstown RI

Requisition ID: 2020-16326 Dept ID: E901 Location: US-RI-North Kingstown Trade: Machinist Trades Post End: 9/30/2020 Remaining Positions: 6

Shielding Mechanic

Shielding Installation Mechanics are required to cut, fit and install lead and plastic shielding to support submarine construction. This work requires a talented crafts-person with an aptitude to learn and the ability to visualize a job from start to finish as well as painting and installing sound dampening. The mechanics will receive job specific training and will receive qualification to perform each process after a demonstration of ability.    Work includes cutting and fitting shielding using carpentry tools such as band-saws, table saws, planers, jointers, routers, undercut saws, paint brush, rollers, spray paint equipment. and various pneumatic tools such as handheld chipping hammers, grinders, nail guns and burr tools. Applicants will be required to read and interpret plans and shipyard procedures.     This position is located in North Kingstown RI

Requisition ID: 2020-16271 Dept ID: E914 Location:US-RI-North Kingstown Trade: Carpentry Trades Post Ends: 8/31/2020 Remaining Positions: 4

Welder - Experienced

Welders are required to weld structural assemblies using GMAW and SMAW during fabrication and installation sequence of submarine construction. Welding at Electric Boat is performed on a wide variety of materials, using an ever growing number of welding processes. Qualification is required for each process, as welders participate in continuous training in new and traditional welding processes using both conventional and state of the art equipment. Assignments will also include use of various pneumatic tools such as grinders, burr tools, wire brushes, etc. Oxy/fuel pre-heat and carbon/arc gouging duties will be performed as well as verifying weld size using weld gauges. Applicants will be required to read and interpret weld symbols, technique sheets and work packages.   This position is located in North Kingstown, RI

Requisition ID: 2020-16236 Dept ID: E900 Location: US-RI-North Kingstown Trade: Welding Trades Post End: 9/7/2020 Remaining Positions: 94

Title Welder - Entry Level

Welders are required to weld structural assemblies using GMAW and SMAW during fabrication and installation sequence of submarine construction. Welding at Electric Boat is performed on a wide variety of materials, using an ever growing number of welding processes. Qualification is required for each process, as welders participate in continuous training in new and traditional welding processes using both conventional and state of the art equipment. Assignments will also include use of various pneumatic tools such as grinders, burr tools, wire brushes, etc. Oxy/fuel pre-heat and carbon/arc gouging duties will be performed as well as verifying weld size using weld gauges. Applicants will be required to read and interpret weld symbols, technique sheets and work packages.   This position is located in North Kingstown, RI

Requisition ID: 2020-16235 Dept ID: E900 Location: US-RI-North Kingstown Trade: Welding Trades Post End: 8/31/2020 Remaining Positions: 20

Title Pipe Welder

Pipe Welders perform welding functions on all submarine piping systems materials, including bi-metallic welds in all positions according to weld procedures using GTAW.  - Welds include butts, sockets, boss roots, weldolets and fillets - Consumes an E.B. insert to form the root pass of a butt weld, performs  5X magnification visual inspection of pipe welds, and weld repair of excavated areas of pipe welds - May operate automatic TIG fixed head and orbital automatic welding equipment - Performs a visual inspection of finished welds. This position is located in North Kingstown, RI

Requisition ID: 2020-16178 Dept ID: E914 Location: US-RI-North Kingstown Trade: Piping Trades Post End: 9/30/2020 Remaining Positions: 5

Title Pipefitter

Pipefitters fabricate and install the piping systems that will carry the ship's liquids and gasses at various pressures. Pipefitters use measurement, fit-up bending, and installation skills and techniques to comply with tight tolerances. Familiarity with pipe bending requirements, bolting and welding pipe hangers to support systems & pipe detail fabrication is helpful.  Duties include: - Pipe fit-up which may involve welded joints, silver brazed joints or mechanically fastened joints - Working with very small tubing to very large diameter piping - Working with various systems including hydraulic, lube oil, high and low pressure air, high and low pressure steam, sea water, chilled water, and potable water - Grooming systems to prepare for Company, Navy and Government inspections - Cutting pipe using saws and pipe cutters and fit pipe using consumable inserts - Cleaning and maintaining cleanliness of piping components

Requisition ID: 2020-16168 Dept ID: E900 Location: US-RI-North Kingstown Trade: Piping Trades Post End: 8/31/2020 Remaining Positions: 22

Title AutoFrameCylinder Welder Fabricator

The AutoFrameCylinder position encompasses both welding and shipfitting/metal fabrication functions: - Qualified candidates will fabricate frames and cylinders to produce completed cylinders that are ready for outfitting functions; this is accomplished through the use of hydraulic and electronic fixtures coupled with various fitting and welding techniques - Candidates must be mechanically inclined and capable of interpreting work packages, fixture set up sheets, drawings, ER's, and SSP's - Must be able to pass semi-automatic and mechanized spray and pulse arc test (GMAPLS, GMASPS & GMASPM) prior to being granted a position within the AFC This position is located in North Kingstown, RI

Requisition ID: 2020-15971 Dept ID: E914 Location: US-RI-North Kingstown Trade: Welding Trades Post End: 8/31/2020 Remaining Positions: 7

Title Shipfitter

A Shipfitter is required to interpret construction drawings with basic mathematic ability. Duties include, but are not limited to: - Layout, fabrication, assembly and installation of foundations, structures, bulkheads, frames, components and deck packages - Will need to develop a working knowledge of structural weld joint fit-up/weld symbols, burning and grinding operations - Will be required to align parts in relation to each other using jacks, clips and wedges through use of blueprints and templates - Tack-weld structural parts as required - Must be able to read and interpret written policies, procedures and guidelines as work assignments will be accomplished using company drawings, test documents, technical manuals, and shipyard procedures - Work conditions may include entry in restricted/confined spaces This position is located in North Kingstown, RI

Requisition ID: 2020-15918 Dept ID: E900 Location: US-RI-North Kingstown Trade: Steel Trades Post End: 8/31/2020 Remaining Positions: 35

Title Shipfitter - Entry-Level

A Shipfitter is required to interpret construction drawings with basic mathematics ability. Duties include, but are not limited to: - Layout, fabrication, assembly and installation of foundations, structures, bulkheads, frames, components and deck packages - Will need to develop a working knowledge of structural weld joint fit-up/weld symbols, burning and grinding operations - Will be required to align parts in relation to each other using jacks, clips and wedges through use of blueprints and templates - Tack-weld structural parts as required - Must be able to read and interpret written policies, procedures and guidelines as work assignments will be accomplished using company drawings, test documents, technical manuals, and shipyard procedures - Work conditions may include entry in restricted/confined spaces This position is located in North Kingstown, RI

Requisition ID:  2020-15917 Dept ID: E900 Location: US-RI-North Kingstown Trade: Steel Trades Post End: 8/31/2020 Remaining Positions: 17